Carbon monoxide poisoning associated with blasting operations close to underground enclosed spaces. Part 2. Special working procedures to minimize CO migration

Carbon monoxide (CO) produced by blasting operations in civil engineering works in residential environments can migrate fair distances in the surrounding fractured bedrock and underground infrastructures in the blast area and can then infiltrate enclosed spaces. Poisoning of workers and people in general exposed to an emission of CO produced by explosives has occurred many times. Special working procedures must be developed to minimize the risk of poisoning. Three different procedures were tested in the field where the geologic conditions (slate confined with more than 0.5 m of clayey till) were favourable for CO migration. The first procedure tested aimed to minimize CO production and migration by changing the usual explosive type and the sequence of blasting, excavating and embanking the debris, and installing vents in the surrounding rock. This method did not have a significant effect on CO migration. The second method aimed to mitigate the CO produced by excavating the overburden before drilling, plac..., Le monoxyde de carbone (CO) généré par des travaux aux explosives en milieu résidentiel lors de travaux de génie civil, peut migrer sur des distances considérables dans le roc fracturé et dans des infrastructures enfouies et s'infiltrer dans des espaces confinées. Plusieurs travailleurs et résidents ont ainsi déjà été intoxiqués par des émanations CO produites par des travaux aux explosifs. Dans le but d'éliminer les risques d'intoxication des résidents ou de travailleurs, des procédures spéciales de travail ont été développées. Trois différentes procédures furent testées en champ où les conditions géologiques sont favorables à la migration du CO (ardoise confiné par plus de 0,5 m de till argileux). La première procédure testée avait comme objectif de minimiser la production de CO et sa migration en changeant le type et la séquence de sautage usuel, en excavant et remblayant les débris, et en installant des évents dans le roc entourent une partie du sautage. Cette méthode n'a pas eu d'effet significatif s...
Auteurs (Zotero)
Martel, Richard; Trépanier, Luc; Lavigne, Marc-André; Lévesque, Benoît; Sanfaçon, Guy; Brousseau, Patrick; Auger, Pierre
Date de publication (Zotero)
juin, 2004
URL (Zotero)
http://www.nrcresearchpress.com/doi/abs/10.1139/t04-002